[c-nsp] IOS PPPoE configs

[Kimaru Mansour]

You might want to read up on these:

http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/12_4/bba_12_4_book.html
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ra_mpls_vpns.html



On Wed, Sep 14, 2011 at 9:09 PM, Matthew S. Crocker <matthew at crocker.com>wrote:

>
>
> Hello,
>
>  I'm looking to migrate my DSL PPPoE sessions off my Redback SE-400 onto a
> Cisco 7206 NPE-G1.   Currently I have a couple thousand DSL subs with PPPoE
> sessions over 18 ATM PVCs (OC-3 ATM).  I'd like to terminate them on a
> PA-A6-OC3SMI card.    Authentication is via RADIUS.   I currently use
> Redback contexts to separate customers.  I would need to use VRFs I guess on
> Cisco for the same functionality.
>
> Does anyone have any example configs they could share for setting up PPPoE
> on IOS?
>
>
> Thanks
>
> -Matt
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>