[c-nsp] QoS on Multilink T1's.

[Chuck Church]

Maybe check the release notes for later 12.4 releases, just in case?  Silly
question, but is CEF enabled now?  

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joseph Mays
Sent: Tuesday, April 03, 2012 1:09 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] QoS on Multilink T1's.

> I took each t1 individually out of the multilink bundle, so the bundle 
> contained only the first t1, then only the second t1. In both cases, 
> the problem disappeared and QoS began working normally as soon as 
> there was only one t1 in the bundle. This is without changing the 
> multilink interface config or policy itself. As soon as I put both 
> t1's back in the problem returns immediately.
>
> Right now I'm planning to upgrade the router to 12.4ish Monday.

So unfortunately this problem still exists. If upgrading from 12.3 to 12.4
did not fix the problem, I guess it's probably not a bug. So I'm momentarily
at a loss. I can post the config if anyone would like to see it. Is there
anyone out there who is doing QoS across a multilinked bundle of more than
one T1 who can send it to me so I can compare what you have with what I am
doing?


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/