[c-nsp] Nexus 5010 and Flex Links

John Gill johgill at cisco.com
Mon Apr 16 12:22:29 EDT 2012


Hi Skeeve,
That is not right, we should state the limitations of the feature in the 
configuration guide. I will get this edited.

Regards,
John Gill
cisco


On 4/14/12 4:24 AM, Skeeve Stevens wrote:
> Thanks John,  just very frustrating is all... the release notes said a
> particular version supported it, and when we did it, it didn't.  I was
> hoping it was coming, now I have to look at options of changing the
> hardware.
>
> Thanks again.
>
>
> *Skeeve Stevens, CEO*
> eintellego Pty Ltd
> skeeve at eintellego.net <mailto:skeeve at eintellego.net> ;
> www.eintellego.net <http://www.eintellego.net>
>
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>
> Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellego <http://facebook.com/eintellego>
>
> twitter.com/networkceoau <http://twitter.com/networkceoau> ;
> www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>
>
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>
>
> The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
>
>
>
> On Sat, Apr 14, 2012 at 11:22, John Gill <johgill at cisco.com
> <mailto:johgill at cisco.com>> wrote:
>
>     Hi Skeeve,
>     For the 5010/5020 you will see the following error when you enable
>     the feature:
>
>     (config)# feature flexlink
>     2012 Apr 14 01:16:32 esc-n5020-1
>     %FLEXLINK-2-FLEXLINK_FEATURE___ENABLE_FAILED_PLATFORM: Enablement of
>     feature Flexlink failed. Flexlink is not supported on
>     Nexus5010/Nexus5020 platforms.
>     Error: while enabling/disabling service: Flexlink, err: Failure to
>     enable feature Flexlink - platform not supported (0x42880039)
>
>     It is unlikely future support will be added to the 1st-gen platform.
>
>     Apologies,
>     John Gill
>     cisco
>
>
>     On 4/13/12 7:49 PM, Skeeve Stevens wrote:
>
>         Hey all,
>
>         Does anyone know when/if the Nexus 5010 will support Flex Links?
>
>         We upgraded to 5.0(2)N1(1) thinking it would, but it didn't work.
>
>         Thoughts?
>
>         *Skeeve Stevens, CEO*
>         eintellego Pty Ltd
>         skeeve at eintellego.net <mailto:skeeve at eintellego.net> ;
>         www.eintellego.net
>         <http://www.eintellego.net><http://www.__eintellego.net.au
>         <http://www.eintellego.net.au>>
>
>         Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>
>         Cell +61 (0)414 753 383 ; skype://skeeve
>
>         facebook.com/eintellego <http://facebook.com/eintellego>
>
>         twitter.com/networkceoau <http://twitter.com/networkceoau> ;
>         www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>
>
>         PO Box 7726, Baulkham Hills, NSW 1755 Australia
>
>         The Experts Who The Experts Call
>         Juniper - Cisco – Brocade - IBM
>         _________________________________________________
>         cisco-nsp mailing list cisco-nsp at puck.nether.net
>         <mailto:cisco-nsp at puck.nether.net>
>         https://puck.nether.net/__mailman/listinfo/cisco-nsp
>         <https://puck.nether.net/mailman/listinfo/cisco-nsp>
>         archive at http://puck.nether.net/__pipermail/cisco-nsp/
>         <http://puck.nether.net/pipermail/cisco-nsp/>
>
>


More information about the cisco-nsp mailing list