[c-nsp] Understanding Out/Input bytes in Interface Counters on 2811

Peter Subnovic cnspmail002 at googlemail.com
Thu Apr 19 15:47:40 EDT 2012


Hi,

thanks again to all who replied, i appreciate it.

To answer your question:

The reported Volume from the ISP is 300GB but the interface counter for
output bytes are "only" showing 3 Billion bytes (3GB) and input bytes are
at around 750 MB in a timeframe of 6 weeks (just checked when the counters
were cleared for the last time).

If you need any additional info, just ask.

Thanks again.

Cheers,
Peter

On Thu, Apr 19, 2012 at 8:34 PM, Keegan Holley <keegan.holley at sungard.com>wrote:

>
>
>
> 2012/4/19 Peter Subnovic <cnspmail002 at googlemail.com>
>
>> Thanks Chuck, Bruce and James for your replys,
>>
>> I did clear the counters 6 weeks ago (near the beginning of march) while i
>> was troubleshooting another issue .
>>
>> The router was not rebooted for 15 weeks.
>>
>> Thanks for the hint that the counters are (most probably) 32-bit counters,
>> although the 3 Billion bytes reported as output should fit in the counter.
>>
>>
> Was it 3GB or 300GB? 300GB would not fit in a 32 bit counter.
>
>


More information about the cisco-nsp mailing list