[c-nsp] 15.2(2)S issues on 7600/SUP720

[Pete Lumbis]

After the problem do you see spikes in the CPU history? I believe most show
commands run as a low priority process that can yield frequently, so it's
possible something else is going on and the symptom is the slow terminal
response time.

On Wed, Apr 25, 2012 at 2:58 PM, Jason Lixfeld <jason at lixfeld.ca> wrote:

> I'm testing 15.2(2)S on a couple of 7600/SUP720 combos and I've
> experienced some odd behaviour and I'm curious about whether  or not anyone
> else has seen this.   It's been really hard to reproduce, but it does
> happen once in a while, so I'm hoping similar experiences might give me
> some TAC ammo.
>
> Basically, at certain points in time, anything config related seems to
> hang for an indefinite period of of time before it will spit out the
> expected output:
>
> show run
> show run | [i | e | s | etc...]
> write t
>
> Sometimes it hangs for minutes, sometimes hours.  Other times it's
> instantaneous, as expected.  It doesn't seem to be CPU related and it
> doesn't seem to throw any logging messages.
>
> Anyone seen anything similar in their testing?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>