[c-nsp] help with NAT on ASA 8.3+

[Ryan West]

Double NAT. 

Should look something like this:

nat (inside,outside) source static obj_10.10.0.1 obj_172.17.1.1 destination static obj_10.10.1.0 obj_10.10.1.0

Since this equivalent to static policy nat in 8.2 and below, make sure you position this nat rule near the top. 

Sent from handheld 

On Aug 7, 2012, at 10:12 AM, "Scott Voll" <svoll.voip at gmail.com> wrote:

> I have a LAN to LAN connection (say 10.10.1.x/24) that terminates on my ASA
> 8.3+.
> 
> I have a internal IP address on the inside of 10.10.0.1 that because of DNS
> needs to look like 172.17.1.1.
> 
> So client at remote site 10.10.1.250 gets DNS for 172.17.1.1 but should be
> NAT'd and connecting to 10.10.0.1.  How do I setup the NAT in 8.3+?
> 
> 10.10.1.x looks to be on the outside interface and 10.10.0.1 looks to be on
> the inside interface.
> 
> TIA
> 
> Scott
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/