[c-nsp] Cisco 7200 LNS Multilink per-user RADIUS attributes

[Steve Glendinning]

Hi Wayne,

On 8 August 2012 10:23, Wayne Lee <linkconnect at googlemail.com> wrote:
>
> Let's see the virtual-template. Our's has "ppp multilink" set in it.

Here it is, and "ppp multilink" is set:

multilink virtual-template 1

interface Virtual-Template1
 ip unnumbered Loopback1
 ip verify unicast reverse-path
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip tcp adjust-mss 1420
 no logging event link-status
 ntp disable
 ipv6 unnumbered Loopback0
 ipv6 enable
 no ipv6 nd ra suppress
 ipv6 dhcp server v6DSLPOOL
 no peer default ip address
 ppp max-terminate 10
 ppp max-configure 5
 ppp max-bad-auth 3
 ppp authentication chap pap callin
 ppp multilink
 ppp timeout retry 15
 ppp timeout authentication 15


--
Steve Glendinning