[c-nsp] Cisco 7200 LNS Multilink per-user RADIUS attributes

[Wayne Lee]

>> Let's see the virtual-template. Our's has "ppp multilink" set in it.
>
> Here it is, and "ppp multilink" is set:
>
> multilink virtual-template 1
>
> interface Virtual-Template1
>  ip unnumbered Loopback1
>  ip verify unicast reverse-path
>  no ip redirects
>  no ip unreachables
>  no ip proxy-arp
>  ip tcp adjust-mss 1420
>  no logging event link-status
>  ntp disable
>  ipv6 unnumbered Loopback0
>  ipv6 enable
>  no ipv6 nd ra suppress
>  ipv6 dhcp server v6DSLPOOL
>  no peer default ip address
>  ppp max-terminate 10
>  ppp max-configure 5
>  ppp max-bad-auth 3
>  ppp authentication chap pap callin
>  ppp multilink
>  ppp timeout retry 15
>  ppp timeout authentication 15

That looks fine, we only needed the "ppp multilink" option to be set.


Wayne