[c-nsp] me3600 svi's not showing in and out bit counts that i see on corresponding phy int

Aaron aaron1 at gvtc.com
Wed Aug 8 09:54:02 EDT 2012


anybody know why me3600 svi doesn't seem to show in and out bit counts that
the underlying phy int shows?  ....all svi's (10,11,13) are in a vrf running
over mpls l3vpn

 

 

3600#sh int vl 10 | in 30 sec

30 second input rate 2000 bits/sec, 3 packets/sec

30 second output rate 1000 bits/sec, 3 packets/sec

 

3600#sh int g0/1 | in 30 sec

30 second input rate 402000 bits/sec, 359 packets/sec

30 second output rate 6157000 bits/sec, 613 packets/sec

 

 

Details.

 

3600>sh ver | in IOS

Cisco IOS Software, ME360x Software (ME360x-UNIVERSAL-M), Version 15.2(2)S,
RELEASE SOFTWARE (fc1)

 

3600>sh spann in g0/1

 

Vlan                Role Sts Cost      Prio.Nbr Type

------------------- ---- --- --------- --------
--------------------------------

VLAN0010            Desg FWD 4         128.1    P2p

VLAN0011            Desg FWD 4         128.1    P2p

VLAN0012            Desg FWD 4         128.1    P2p

VLAN0013            Desg FWD 4         128.1    P2p

 

3600>sh int g0/1 | in 30 sec

  30 second input rate 545000 bits/sec, 459 packets/sec

  30 second output rate 14636000 bits/sec, 1318 packets/sec

 

3600>sh int vla 10 | in 30 sec

  30 second input rate 2000 bits/sec, 4 packets/sec

  30 second output rate 2000 bits/sec, 4 packets/sec

 

3600>sh int vla 11 | in 30 sec

  30 second input rate 0 bits/sec, 0 packets/sec

  30 second output rate 0 bits/sec, 0 packets/sec

 

3600>sh int vla 12 | in 30 sec

                       ^

% Invalid input detected at '^' marker.

 

3600>sh int vla 13 | in 30 sec

  30 second input rate 0 bits/sec, 0 packets/sec

  30 second output rate 0 bits/sec, 0 packets/sec

 

3600>sh spann vl 12

 

VLAN0012

  Spanning tree enabled protocol rstp

  Root ID    Priority    24588

             Address     f47f.3549.dd80

             This bridge is the root

             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec

 

  Bridge ID  Priority    24588  (priority 24576 sys-id-ext 12)

             Address     f47f.3549.dd80

             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec

             Aging Time 300

 

Interface           Role Sts Cost      Prio.Nbr Type

------------------- ---- --- --------- --------
--------------------------------

Gi0/1               Desg FWD 4         128.1    P2p

 

 

 



More information about the cisco-nsp mailing list