[c-nsp] me3600 svi's not showing in and out bit counts that isee on corresponding phy int

[Juergen Marenda]

on 4900M

!
int vlan NNN
 counter 
!

did help 
(yes i know the 4900M ist not a "metro" switch)

Mit freundlichen Gru?en 
Kind regards 
Veuillez agreer mes salutations distinguees 
Met vriendelijke groet 

Juergen.

> Try to set the load-interval to 30s, then check again.
> Xu Hu
> 
> On 8 Aug, 2012, at 21:54, "Aaron" <aaron1 at gvtc.com> wrote:
> > anybody know why me3600 svi doesn't seem to show in and out 
> bit counts that
> > the underlying phy int shows?  ....all svi's (10,11,13) are 
> in a vrf running
> > over mpls l3vpn
> > 
> > 3600#sh int vl 10 | in 30 sec
> > 30 second input rate 2000 bits/sec, 3 packets/sec
> > 30 second output rate 1000 bits/sec, 3 packets/sec
> > 
> > 3600#sh int g0/1 | in 30 sec
> > 30 second input rate 402000 bits/sec, 359 packets/sec
> > 30 second output rate 6157000 bits/sec, 613 packets/sec
[...]