[c-nsp] ME3600X Embedded Packet Capture

[Pshem Kowalczyk]

Hi,


On 11 August 2012 10:32, Ivan <cisco-nsp at itpro.co.nz> wrote:

{cut}

>  xconnect 1.2.3.4 666 encapsulation mpls

Speaking from general experience - this is the culprit. In
point-to-point L2VPNs there is (usually, I admit I'm not sure if
that's the case on 3600x) no MAC address learning (which nicely
conserves the resources on the switch). If you really need to see that
address - you should turn that into a point-to-point VPLS.

kind regards
Pshem