[c-nsp] HSRPv1 and HSRPv2

David Prall dcp at dcptech.com
Fri Aug 17 21:13:51 EDT 2012

Just turn on v2, v4 and v6 will require distinct id's. When you first turn
on v2 on a single router, the two will stop talking so be prepared for the
outage on v4.



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Gmail
Sent: Friday, August 17, 2012 8:33 PM
To: Nsp
Subject: [c-nsp] HSRPv1 and HSRPv2

Hi Experts,

Understood that such question need to real test in the lab, but don't have
same series equipment so far, so...
Does anybody have any experience to configure the HSRPv1 and HSRPv2 in 7609,
the thing is the current network just deploy IPv4 service, running some
sub-interface with HSRPv1, now we want to load the IPv6 service with
dual-stack for such interfaces. 
My question is can we just use the same sub-interface which combine HSRPv1
and HSRPv2 service? Or we must use new different sub-interface? Or new
physical interface?

Thanks and regards,

Sent from my iPad
cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list