[c-nsp] remove PAT command from FWSM configure

[zhangyongshun]

hi,everybody:
I have add two line command for my FWSW PAT configure.
nat (inside) 100 129.1.1.0 255.255.255.0
global (outside) 100 122.226.204.41

but,now i can't remove this command from FWSW running-configure.


FWSM(config)# no nat (in
FWSM(config)# no nat (inside) ?

configure mode commands/options:
<0-2147483647> The <nat_id> of this group of hosts/networks. This <nat_id>
will be referenced by the global command to associate a
global pool with the local IP address. <nat_id> '0' is used
to indicate no address translation for local IP. The limit
is 65535 with access-lists
FWSM(config)# no nat (inside) 100 ?

configure mode commands/options:
access-list Specify access-list name after this keyword
FWSM(config)# no nat (inside) 100
ERROR: % Incomplete command
JH-DYGS-FWSM(config)# no nat (inside) 100 ?

configure mode commands/options:
access-list Specify access-list name after this keyword
FWSM(config)#


FWSM(config)# show version

FWSM Firewall Version 3.2(8)
Detected an old ASDM version.
You will need to upgrade it before using ASDM.

Compiled on Fri 29-Aug-08 15:09 by fwsmbld

JH-DYGS-FWSM up 1 year 142 days

Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash SMART CF @ 0xc321, 20MB


another question:
nat (inside) 18 0.0.0.0 0.0.0.0
if this commmand match any real inside network traffic?