[c-nsp] remove PAT command from FWSM configure

[Peter Rathlev]

On Sun, 2012-08-26 at 17:42 +0800, zhangyongshun wrote:
> hi,everybody:
> I have add two line command for my FWSW PAT configure.
> nat (inside) 100 129.1.1.0 255.255.255.0
> global (outside) 100 122.226.204.41
> 
> but,now i can't remove this command from FWSW running-configure.
...
> JH-DYGS-FWSM(config)# no nat (inside) 100 ?
> 
> configure mode commands/options:
> access-list Specify access-list name after this keyword
> FWSM(config)#

Just ignore the "?"-hints and issue 

 no nat (inside) 100 129.1.1.0 255.255.255.0

Works fine for me.

> another question:
> nat (inside) 18 0.0.0.0 0.0.0.0
> if this commmand match any real inside network traffic?

That would depend on the definition of "any real inside network
traffic". The NAT statements matches all IPv4 traffic that is not
matched by something more specific, like narrower NAT statements or
statics.

-- 
Peter