[c-nsp] Need SDR info present on XR device.

[Xu Hu]

Log in to the non-owner SDR using admin plane authentication:
Username:xxxx at admin
Password:xxxx
Example:
Username:xxxx at admin
Password:xxxx
http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.7/system_management/configuration/guide/yc37sdr.html

Thanks and regards,
Xu Hu

On 27 Aug, 2012, at 1:21, Sai Kishore <gvssaikishore at gmail.com> wrote:

> Hi Experts,
> 
> My question is on SDR present in the Cisco IOS-XR device
> 
> As you all aware of logging into any module (FWSM, WISM )  present inside
> Cat65K(Chassis device)  using the following command.
> "session slot <slot num> processor 1"
> 
> With this command , User can able to login into module with its credentials.
> and can get the 'show version' and 'show run' command outputs of the module.
> 
> Similarly is there any command to login into non-owner (named) sdr from
> owner sdr (IOS XR device)
> 
> If there is no command on IOS-XR device , then how can we get the outputs
> of SDR 'show version' , 'show run' etc..(Assume SDR is configured without
> ip address)
> 
> Any possible solutions to this above scenario ?
> 
> Thanks,
> Sai Kishore.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/