[c-nsp] UCS blade internal vlan fixed range ??

[Lars Christensen]

As I recall it, there is currently no way to change the internal used Vlan range on UCSM (neither via GUI or CLI).

Lars Christensen
CCIE #20292



Den 06/12/2012 kl. 17.48 skrev Jeffrey G. Fitzwater <jfitz at princeton.edu>:

> We are looking at using the CISCO UCS blades but we have a problem with the vlan ID we have in use not available on the UCS blade.
> 
> Is there any way to change the internal VLAN range (3968 to 4048) that is fixed in in the USC blade code?
> 
> They fixed this problem for the NX-OS to allow it to be user defined so there is no conflict with existing vlan ID a customer may already be using.
> 
> 
> 
> Thanks for any help.
> 
> 
> 
> Jeff Fitzwater
> OIT Network Systems
> Princeton University
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/