[c-nsp] Copper SFP with ME3600X

[Mathias Sundman]

On 12/10/2012 08:23 PM, Nick Hilliard wrote:
> On 10/12/2012 19:12, Lobo wrote:
>> Hi everyone.  Been having a hard time trying to get a copper SFP to work on
>> our ME-3600X-24TS-Ms.  According to Cisco documentation, the GLC-T SFP is
>> supposed to be supported on one of the fiber ports. However every Cisco SFP
>> we've tried always spits back an error message:
>>
>> Switch#
>>
>> *Dec  6 19:48:30.448: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Te0/1 is not
>> supported
>>
>> *Dec  6 19:48:30.448: %PM-4-ERR_DISABLE: gbic-invalid error detected on
>> Te0/1, putting Te0/1 in err-disable state
> in theory, these should be supported but I haven't tried them on this
> platform.  Have you tried the following commands:
>
> service unsupported-transceiver
> no errdisable detect cause gbic-invalid
> errdisable recovery cause gbic-invalid
>
I don't have any Cisco original copper SFPs, but am currently running a 
ME3600X-24TS with Transmode Copper SFP's in it successfully with the 
above commands entered to allow unsupported-transceivers.