[c-nsp] Copper SFP with ME3600X

[Nick Hilliard]

On 10/12/2012 19:12, Lobo wrote:
> Hi everyone.  Been having a hard time trying to get a copper SFP to work on
> our ME-3600X-24TS-Ms.  According to Cisco documentation, the GLC-T SFP is
> supposed to be supported on one of the fiber ports. However every Cisco SFP
> we've tried always spits back an error message:
> 
> Switch#
> 
> *Dec  6 19:48:30.448: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Te0/1 is not
> supported
> 
> *Dec  6 19:48:30.448: %PM-4-ERR_DISABLE: gbic-invalid error detected on
> Te0/1, putting Te0/1 in err-disable state

in theory, these should be supported but I haven't tried them on this
platform.  Have you tried the following commands:

service unsupported-transceiver
no errdisable detect cause gbic-invalid
errdisable recovery cause gbic-invalid

?

It would also be a good idea to talk to your account manager and SE about
why this doesn't work.

Nick