[c-nsp] Moving Routing from 7206VRX to 6509-E

[An Nguyen]

We just purchased the Cisco 6509-E with 2 Supervisor Engine 2T modules and two 10 GB modules,  plus a few 48 Gb ports modules.
 
My plan is to move all routing, plus QoS from the 7206 to this new 6509-E.
 
The 6509-E will also be configured for InterVLAN routing to handle at least 60 different VLANs (60 VLAN interfaces?) and the routing protocol will be EIGRP.
 
Please adivse on how I should go about accomplishing this?
 
Thanks

If you need to provide Emprise Bank with sensitive information such as account numbers, social security numbers, pin numbers, user names, or passwords, please use our secure email site at https://securemail.emprisebank.com. This site will encrypt and send the information securely. 

For your protection, do not submit sensitive information about yourself via non-secure email. Information sent without the use of the secure email site is not encrypted, and we cannot guarantee your privacy. 

This communication is intended only for the person or entity to which it is addressed. If you are not the intended recipient, you may not make use of the enclosed information in any way. Please notify Emprise Bank of the error immediately and delete the email from your computer.