[c-nsp] Moving Routing from 7206VRX to 6509-E

[Blake Dunlap]

If you have specific questions, I'm sure many on here would be happy to
assist with issues, but this is venturing into the "Hire a consultant"
category.

-Blake


On Tue, Dec 11, 2012 at 1:01 PM, An Nguyen <anguyen at emprisebank.com> wrote:

> We just purchased the Cisco 6509-E with 2 Supervisor Engine 2T modules and
> two 10 GB modules,  plus a few 48 Gb ports modules.
>
> My plan is to move all routing, plus QoS from the 7206 to this new 6509-E.
>
> The 6509-E will also be configured for InterVLAN routing to handle at
> least 60 different VLANs (60 VLAN interfaces?) and the routing protocol
> will be EIGRP.
>
> Please adivse on how I should go about accomplishing this?
>
> Thanks
>
> If you need to provide Emprise Bank with sensitive information such as
> account numbers, social security numbers, pin numbers, user names, or
> passwords, please use our secure email site at
> https://securemail.emprisebank.com. This site will encrypt and send the
> information securely.
>
> For your protection, do not submit sensitive information about yourself
> via non-secure email. Information sent without the use of the secure email
> site is not encrypted, and we cannot guarantee your privacy.
>
> This communication is intended only for the person or entity to which it
> is addressed. If you are not the intended recipient, you may not make use
> of the enclosed information in any way. Please notify Emprise Bank of the
> error immediately and delete the email from your computer.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>