[c-nsp] Cisco command to see active session on "cisco WS-C6503-E (R7000)"

[Samol]

Hi AJ,

No, the output of this command shows us the source/Destinaion IP address
using UDP or TCP etc.

Regards,
Sam


2012/12/13 Andrew Jones <Andrew.Jones at alphawest.com.au>

> Do you mean to see who is logged into the cli?
>
> Try  "who"
>
> Andrew Jones
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:
> cisco-nsp-bounces at puck.nether.net] On Behalf Of Samol
> Sent: Thursday, 13 December 2012 12:57 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco command to see active session on "cisco WS-C6503-E
> (R7000)"
>
> Hi All,
>
> I believe there is a command that we can use to see the active sessions
> on cisco WS-C6503-E (R7000), but somehow I can't remember what the command
> is. Pls let me know if you know this command.
>
> Regards,
> Sam
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>