[c-nsp] Cisco command to see active session on "cisco WS-C6503-E (R7000)"

David Prall dcp at dcptech.com
Wed Dec 12 22:04:48 EST 2012


Show tcp brief

--
http://dcp.dcptech.com


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Samol
Sent: Wednesday, December 12, 2012 9:47 PM
To: Andrew Jones
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Cisco command to see active session on "cisco
WS-C6503-E (R7000)"

Hi Aj,

that command can do without having to enable this. its like the command
uses on windows "netstat?" so that see can see the active sessions which
are goung thru router.

Regards,
Sam
 On Dec 13, 2012 9:40 AM, "Andrew Jones" <Andrew.Jones at alphawest.com.au>
wrote:

> Ok, so you mean sessions going through the router?****
>
> ** **
>
> You need netflow enabled on the switch, then enable "ip flow ingress"  and
> "ip flow egress" on the interface you are interested in, then perform a
> "show ip cache flow"****
>
> ** **
>
> It will give you this info, but alot of it uses HEX codes you need to
> translate... (google is your friend)****
>
> ** **
>
> Andrew Jones****
>
> Alphawest | Optus Business****
>
> ** **
>
> *From:* Samol [mailto:molasian at gmail.com]
> *Sent:* Thursday, 13 December 2012 1:25 PM
> *To:* Andrew Jones
> *Cc:* cisco-nsp at puck.nether.net
> *Subject:* Re: [c-nsp] Cisco command to see active session on "cisco
> WS-C6503-E (R7000)"****
>
> ** **
>
> Hi AJ,****
>
> ** **
>
> No, the output of this command shows us the source/Destinaion IP address
> using UDP or TCP etc. ****
>
> ** **
>
> Regards,****
>
> Sam****
>
> ** **
>
> 2012/12/13 Andrew Jones <Andrew.Jones at alphawest.com.au>****
>
> Do you mean to see who is logged into the cli?
>
> Try  "who"
>
> Andrew Jones****
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:
> cisco-nsp-bounces at puck.nether.net] On Behalf Of Samol
> Sent: Thursday, 13 December 2012 12:57 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco command to see active session on "cisco WS-C6503-E
> (R7000)"
>
> Hi All,
>
> I believe there is a command that we can use to see the active sessions
> on cisco WS-C6503-E (R7000), but somehow I can't remember what the command
> is. Pls let me know if you know this command.
>
> Regards,
> Sam****
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/****
>
> ** **
>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list