[c-nsp] Cisco command to see active session on "cisco WS-C6503-E (R7000)"

[Dobbins, Roland]

On Dec 13, 2012, at 9:40 AM, Andrew Jones wrote:

> You need netflow enabled on the switch, then enable "ip flow ingress"  and "ip flow egress" on the interface you are interested in, then perform a "show ip cache flow"

In addition to all the caveats which render pre-Sup2T/DFC4 NetFlow on 6500 extremely problematic, one ought never under any circumstances to enable both ip flow ingress and ip flow egress on the same interface.

Instead, use one or the other.  But not both.

-----------------------------------------------------------------------
Roland Dobbins <rdobbins at arbor.net> // <http://www.arbornetworks.com>

	  Luck is the residue of opportunity and design.

		       -- John Milton