[c-nsp] Cisco command to see active session on "cisco WS-C6503-E (R7000)"

[Charles Sprickman]

On Dec 12, 2012, at 11:35 PM, Dobbins, Roland wrote:

> 
> On Dec 13, 2012, at 9:40 AM, Andrew Jones wrote:
> 
>> You need netflow enabled on the switch, then enable "ip flow ingress"  and "ip flow egress" on the interface you are interested in, then perform a "show ip cache flow"
> 
> In addition to all the caveats which render pre-Sup2T/DFC4 NetFlow on 6500 extremely problematic, one ought never under any circumstances to enable both ip flow ingress and ip flow egress on the same interface.
> 
> Instead, use one or the other.  But not both.

What other platforms, if any, does this rule apply to?

I'm specifically curious about the NPE-G2, but always happy to mentally catalog general cisco quirks.

Charles

> 
> -----------------------------------------------------------------------
> Roland Dobbins <rdobbins at arbor.net> // <http://www.arbornetworks.com>
> 
> 	  Luck is the residue of opportunity and design.
> 
> 		       -- John Milton
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/