[c-nsp] ASR XR LACP config guide?

[Brian Christopher Raaen]

is this for IOS-XE on an ASR1000 or IOS-XR on an ASR 9000.  I'm
assuming that you mean a ASR1000, but your subject was asking about
IOS-XR which only runs one ASR9000, CRS-1, or CRS-3

---
Brian Raaen
Network Architect
Zcorum

On Thu, Feb 2, 2012 at 3:20 PM, -Hammer- <bhmccie at gmail.com> wrote:
> Based on the number of questions I see here and on NANOG I guess the
> documentation is limited or hard to find on the ASRs. Can anyone provide a
> link to some documentation specific to LACP configuration on the XE
> software? I understand the functionality showed up somewhere around 2.5-2.6
> but my gear is still on order and I have to start figuring things out. CCO
> didn't really help much except for generic docs. Maybe that's all I need....
>
> --
>
>
> -Hammer-
>
> "I was a normal American nerd"
> -Jack Herer
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/