[c-nsp] ASR XR LACP config guide?

[-Hammer-]

Major (minor) typo on my part. IOS-XE on an ASR 1004. Who put the E and 
the R so close together on the keyboard? Switching to Dvorak....

-Hammer-

"I was a normal American nerd"
-Jack Herer



On 2/2/2012 2:28 PM, Brian Christopher Raaen wrote:
> is this for IOS-XE on an ASR1000 or IOS-XR on an ASR 9000.  I'm
> assuming that you mean a ASR1000, but your subject was asking about
> IOS-XR which only runs one ASR9000, CRS-1, or CRS-3
>
> ---
> Brian Raaen
> Network Architect
> Zcorum
>
> On Thu, Feb 2, 2012 at 3:20 PM, -Hammer-<bhmccie at gmail.com>  wrote:
>> Based on the number of questions I see here and on NANOG I guess the
>> documentation is limited or hard to find on the ASRs. Can anyone provide a
>> link to some documentation specific to LACP configuration on the XE
>> software? I understand the functionality showed up somewhere around 2.5-2.6
>> but my gear is still on order and I have to start figuring things out. CCO
>> didn't really help much except for generic docs. Maybe that's all I need....
>>
>> --
>>
>>
>> -Hammer-
>>
>> "I was a normal American nerd"
>> -Jack Herer
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/