[c-nsp] %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP

[Drew Weaver]

Howdy,

I had a software forced reload on a switch (on this particular switch it was the first time.)

It left a crashinfo, which is unusual in my experience so it may actually be a software issue.

The switch is running SXI3 and this is the beginning of the crash dump, I tried to use the bugchecker on cisco.com to figure out if maybe this is just a bug in SXI3 but wondered if anyone is good at decoding these messes?

Feb 20 12:48:06 EST: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP
%Software-forced reload
12:48:06 EST Mon Feb 20 2012: Breakpoint exception, CPU signal 23, PC = 0x424A5D18

--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------

-Traceback= 424A5D18 424A386C 41D08558 41D09BDC 42089F9C 4208A0F4 42498EFC
$0 : 00000000, AT : 43C00000, v0 : 45480000, v1 : 00000000
a0 : 46F3CE28, a1 : 00008100, a2 : 00000000, a3 : 00000000
t0 : 42498FE8, t1 : 34008101, t2 : 42499010, t3 : FFFF00FF
t4 : 42498FE8, t5 : 500122E8, t6 : 00000000, t7 : 5C651E4D
s0 : 00000000, s1 : 43B10000, s2 : 00000000, s3 : 43A80000
s4 : 43A80000, s5 : 43A80000, s6 : 43360000, s7 : 00000001
t8 : 5001234C, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 43C050B4, sp : 50012418, s8 : 43350000, ra : 424A386C
EPC  : 424A5D18, ErrorEPC : BFC00000, SREG     : 34008103
MDLO : 00000000, MDHI     : 00000000, BadVaddr : 00000000
DATA_START : 0x436B77F0
Cause 00000C24 (Code 0x9): Breakpoint exception

Anyway, good old 375 seconds of pain =)

Anyone have any thoughts?

Thanks,
-Drew