[c-nsp] %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP

[Tóth András]

Hi Drew,

First of all, the first line of the 'show version' is required to decode this.

Additionally, as the message says "RP is being reset by the SP", the
routing processor is reset by the switching processor, so you need to
get the crashinfo (mainly the traceback) from the SP, which is
sup-bootflash.

If you send them I can take a look at it.

Best regards,
Andras


On Mon, Feb 20, 2012 at 8:35 PM, Drew Weaver <drew.weaver at thenap.com> wrote:
> Howdy,
>
> I had a software forced reload on a switch (on this particular switch it was the first time.)
>
> It left a crashinfo, which is unusual in my experience so it may actually be a software issue.
>
> The switch is running SXI3 and this is the beginning of the crash dump, I tried to use the bugchecker on cisco.com to figure out if maybe this is just a bug in SXI3 but wondered if anyone is good at decoding these messes?
>
> Feb 20 12:48:06 EST: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP
> %Software-forced reload
> 12:48:06 EST Mon Feb 20 2012: Breakpoint exception, CPU signal 23, PC = 0x424A5D18
>
> --------------------------------------------------------------------
>   Possible software fault. Upon reccurence, please collect
>   crashinfo, "show tech" and contact Cisco Technical Support.
> --------------------------------------------------------------------
>
> -Traceback= 424A5D18 424A386C 41D08558 41D09BDC 42089F9C 4208A0F4 42498EFC
> $0 : 00000000, AT : 43C00000, v0 : 45480000, v1 : 00000000
> a0 : 46F3CE28, a1 : 00008100, a2 : 00000000, a3 : 00000000
> t0 : 42498FE8, t1 : 34008101, t2 : 42499010, t3 : FFFF00FF
> t4 : 42498FE8, t5 : 500122E8, t6 : 00000000, t7 : 5C651E4D
> s0 : 00000000, s1 : 43B10000, s2 : 00000000, s3 : 43A80000
> s4 : 43A80000, s5 : 43A80000, s6 : 43360000, s7 : 00000001
> t8 : 5001234C, t9 : 00000000, k0 : 00000000, k1 : 00000000
> gp : 43C050B4, sp : 50012418, s8 : 43350000, ra : 424A386C
> EPC  : 424A5D18, ErrorEPC : BFC00000, SREG     : 34008103
> MDLO : 00000000, MDHI     : 00000000, BadVaddr : 00000000
> DATA_START : 0x436B77F0
> Cause 00000C24 (Code 0x9): Breakpoint exception
>
> Anyway, good old 375 seconds of pain =)
>
> Anyone have any thoughts?
>
> Thanks,
> -Drew
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/