[c-nsp] automatic bgp route refresh

[Vinny_Abello at Dell.com]

I know this "feature" exists in 12.2(33)SXI4, but I believe it was more accurately classified as a bug and I *thought* it was fixed in a later release. I'd also like to hear if this is actually an intended change or just a regression. If intended, I'd like to know how to prevent this behavior as I don't want to trigger soft updates until I've finished modifying a route-map. It's very CPU intensive with a full table.

-Vinny

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joe Maimon
Sent: Tuesday, February 21, 2012 10:08 AM
To: cisco-nsp
Subject: [c-nsp] automatic bgp route refresh

Hey All,

I would greatly appreciate it if somebody would point me to the release 
notes for the change I see in 15.1 where BGP neighbor route-map 
configurations happen in real time, without needing any clearing, soft 
or otherwise.

Much obliged.

Best,

Joe
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/