[c-nsp] ASA services module on Sup2T?

[Pete Lumbis]

Supported starting with 15.0.1SY1
http://www.cisco.com/en/US/partner/prod/collateral/switches/ps5718/ps708/product_bulletin_c25-696622.html

On Fri, Feb 24, 2012 at 5:45 AM, Peter Rathlev <peter at rathlev.dk> wrote:

> Hi,
>
> We're trying to find out if the ASA services module is supported on the
> Sup2T. Our guess it that it is, but the documentation isn't clear about
> it. We found the following references:
>
>
> http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps11878/qa_c67-648478.html#wp9000260
>
> The list says that the ASA module is supported, but the table underneath
> doesn't mention it.
>
>
> http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.0SY/release_notes.html#wp2565770
>
> ASA services module not mentioned as supported in the 15.0SY release
> notes.
>
>
> http://www.cisco.com/en/US/customer/prod/collateral/modules/ps2706/ps11621/data_sheet_c78-672507.html#wp9000181
>
> Does not list the Sup2T under "Supervisor Card" in "System
> Requirements".
>
> Since the FWSM does seem to be supported, I'd guess that the ASASM is
> too. But maybe not in the current software releases.
>
> Anybode have any hard facts about this?
>
> --
> Peter
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>