[c-nsp] ASR9K MPLS basics

[Xu Hu]

Do you have the configuration of ASR9K and 7600? Last week, i was
configuring the MPLS, MPLS VPN, MPLS TE between the ASR9K and 7600, can
work.
Show the related configuration, let us troubleshooting together.

Thanks and Regards,
Hu Xu
2012/2/25 Ghassan.khalil <ghassan.khalil at gmail.com>

> Hi Peter,
> Sorry if am making this look I am relaying on the mail group to do the
> whole thing for me :)
>
> Let me rephrase this and finish the argument. I am aware of the document
> you mentioned and I have used the document for the 4.0 release during my
> pre-implantation and tests on the same environment.
> The problem is that an end-to-end  l3MPLs was not working between the ASR
> and the 7613 router where both are PEs.
> I was sure that the 7613 is functioning as I already have customers
> connected to it within the MPLS cloud.
> That's why I asked about basic MPLS implementation for the ASR9K.
>
> Anyway I just managed to solve the case as in ASR rd of a vrf is
> configured in the bgp body.
> When I globally configured a test vrf only an export/import route targets
> can be configured.
> The vrf needs to he configured again within the bgp and specify the rd.
>
> Sorry if my questions were generic before.
>
> Ghassan
>
> On Feb 24, 2012, at 11:08 PM, Peter Rathlev <peter at rathlev.dk> wrote:
>
> > On Fri, 2012-02-24 at 22:54 +0200, Ghassan.khalil wrote:
> >> Also Gert if everything was done by google there would be no need for
> >> this mail group or for experienced people in deferent domains to share
> >> their knowledge.
> >
> > Yeah, except a thousand questions about how you tie your shoes would
> > mean most people able to answer more complex questions got tired and
> > went away. :-)
> >
> > Have you tried searching "cisco.com", a page known to host several
> > documents pertaining to configuring Cisco devices? For the fun of it I
> > tried searching for "asr 9000 mpls configuration" and literally the
> > second hit is:
> >
> > "Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration
> > Guide, Release 3.9"
> >
> > It's for XR 3.9, but you didn't mention what version you're on. And I'm
> > certain it exists for other versions too. As a PDF it's 206 pages,
> > walking you through all the basics of MPLS and how to configure your
> > ASR9k to use it.
> >
> > I've never seen or touched an ASR9k, not to mention been logged in to
> > one, but it took me about 15 seconds to find this information. I think
> > that was Gert's point.
> >
> > --
> > Peter
> >
> >
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>