[c-nsp] Cisco 881G PPPoE Issue

[Clayton Zekelman]

Hello,

I posted this to cisco-bba, but due to the low activity on that list, 
I figured this might be better off here.

I'm trying to se up a Cisco 881G router to act as a PPPoE to L2TP LAC.

I have the configuration entered, and have created the bba-group, but 
for some reason any time I enter "pppoe enable group global" on any 
of the FastEthernet interfaces, it takes the setting, but doesn't do 
anything.  When I do a "show run", the statement doesn't show up.

I'm trying to use the box as a small PPPoE server to relay sessions 
via the L2TP through the built in cellular modem.   We currently have 
an old Cisco 2611 that we do this with using an external wireless 
modem, but the wireless carrier is shutting down that network soon, 
and this was to be the replacement.  We use this for situations where 
a customer's DSL line has gone down and they need a temporary 
solution until the telco can repair their service.

Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M),Version 
15.1(1)T3, RELEASE SOFTWARE (fc1)
"flash:c880data-universalk9-mz.151-1.T3.bin"




---

Clayton Zekelman
Managed Network Systems Inc. (MNSi)
3363 Tecumseh Rd. E
Windsor, Ontario
N8W 1H4

tel. 519-985-8410
fax. 519-985-8409