[c-nsp] Router 7200 + GE-PE module

[Gert Doering]

Hi,

On Sun, Jan 29, 2012 at 12:54:11PM +0200, bha Qaqish wrote:
> Am using 7200 with PA-GE module.
> The traffic on the module just 200 Mbps maximum
> And there is drop in the ping between point to point interface in the 7200 router .
> Any ideas

The PA-GE will never do full GigE bandwidth.  It's there if you need
"a bit more than 100 Mbit" or "the physical port needs to be GigE for
cabling reasons".

If you want halfway gige performance in a 7200, get a NPE-G1 or NPE-G2
and use the GigE ports on the NPE.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20120129/6def92ac/attachment.sig>