[c-nsp] OSPFv3 Adjacency issues between 2921 and 3750

[Peter Subnovic]

Hi Mikael,

thanks for the input. Unfortunately i can not set the IPv6 MTU on the 3750.
According to the show ipv6 int xx output, both sides have an mtu of 1500

3750:
===========
GigabitEthernet1/0/24 is up, line protocol is up
  IPv6 is enabled, link-local address is FE80::2
  No Virtual link-local address(es):
    No global unicast address is configured
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::5
    FF02::1:FF00:2
  MTU is 1500 bytes

2921
========
GigabitEthernet0/1 is up, line protocol is up
  IPv6 is enabled, link-local address is FE80::1
  No Virtual link-local address(es):
  No global unicast address is configured
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::5
    FF02::6
    FF02::1:FF00:1
  MTU is 1500 bytes

Thanks for your time.

Kind regards,
Peter



On Mon, Jul 2, 2012 at 10:33 PM, Mikael Abrahamsson <swmike at swm.pp.se>wrote:

> On Mon, 2 Jul 2012, Peter Subnovic wrote:
>
>  If you need any additional input or show commands, please dont hesitate
>> to ask.
>>
>
> MTU issue? Try setting ipv6 mtu 1500 at both ends and see if that changes
> anything?
>
> --
> Mikael Abrahamsson    email: swmike at swm.pp.se
>