[c-nsp] AIR-LAP1131AG-A-K9

[Renelson Panosky]

Good day

I am trying to configure an IP in this AP but some reason i can not get a
command prompt.    It stucks at inatiated CLI...

Press RETURN to get started!

*Mar  1 00:00:05.765: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS
self test passed
*Mar  1 00:00:07.377: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
self test passed on interface Dot11Radio 0
*Mar  1 00:00:08.976: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
self test passed on interface Dot11Radio 1
*Mar  1 00:00:09.065: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log
file flash:/event.log
*Mar  1 00:00:09.066: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP
event log (contains, 0 messages)
*Mar  1 00:00:09.119: AP identified to be in Huck Jr/1240/1130 configuration
*Mar  1 00:00:11.309: %LINK-3-UPDOWN: Interface FastEthernet0, changed
state to up
*Mar  1 00:00:11.373: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JA2,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:20 by prod_rel_team
*Mar  1 00:00:11.374: %SNMP-5-COLDSTART: SNMP agent on host
AP70ca.9bd9.d590 is undergoing a cold start
*Dec  6 19:19:46.045: Warning: Failed to run startup script
*Dec  6 19:19:46.072: %MESH-6-BVI_CREATED: Mesh BVI1 interface created
*Dec  6 19:19:46.093: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Dec  6 19:19:46.105: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
to reset
*Dec  6 19:19:46.105: %LINK-5-CHANGED: Interface Dot11Radio0, changed state
to reset
*Dec  6 19:19:46.321: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Dec  6 19:19:46.655: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline
power source
*Dec  6 19:19:46.925: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0, changed state to down
*Dec  6 19:19:47.097: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
to up
*Dec  6 19:19:47.109: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio1, changed state to up
*Dec  6 19:19:47.109: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio0, changed state to down
*Dec  6 19:19:47.531: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state
to up
*Dec  6 19:19:48.077: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Dec  6 19:19:48.537: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio0, changed state to up
flash:/mesh_start_cfg.txt: No such file or directoryThe filesystem
containing the variables may not be initialized yet.
*Dec  6 19:20:01.069: No Mesh startup file found
*Dec  6 19:20:04.812: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh
adjacency state machine started
*Dec  6 19:20:04.813: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
to reset
*Dec  6 19:20:04.840: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
to up
*Dec  6 19:20:04.841: %LINK-5-CHANGED: Interface Dot11Radio0, changed state
to reset
*Dec  6 19:20:04.870: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state
to up
*Dec  6 19:20:04.870: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
to reset
*Dec  6 19:20:04.898: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
to up
*Dec  6 19:20:05.163: Logging LWAPP message to 255.255.255.255.
*Dec  6 19:20:05.206: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host
255.255.255.255 started - CLI initiated