[c-nsp] AIR-LAP1131AG-A-K9

[Andrew K.]

The AP is in Lightweight Access Point mode, it needs a controller in 
order to be configured.

You need to change it into Autonomous mode in order to configure it via CLI.

In order to do this the AP software needs to be changed.

I can't find the cisco.com doc describing this process, but this can 
point you in the right direction.

https://learningnetwork.cisco.com/thread/14405


On 7/6/2012 11:02 AM, Renelson Panosky wrote:
> Good day
>
> I am trying to configure an IP in this AP but some reason i can not get a
> command prompt.    It stucks at inatiated CLI...
>
> Press RETURN to get started!
>
> *Mar  1 00:00:05.765: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS
> self test passed
> *Mar  1 00:00:07.377: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
> self test passed on interface Dot11Radio 0
> *Mar  1 00:00:08.976: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
> self test passed on interface Dot11Radio 1
> *Mar  1 00:00:09.065: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log
> file flash:/event.log
> *Mar  1 00:00:09.066: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP
> event log (contains, 0 messages)
> *Mar  1 00:00:09.119: AP identified to be in Huck Jr/1240/1130 configuration
> *Mar  1 00:00:11.309: %LINK-3-UPDOWN: Interface FastEthernet0, changed
> state to up
> *Mar  1 00:00:11.373: %SYS-5-RESTART: System restarted --
> Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JA2,
> RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2009 by Cisco Systems, Inc.
> Compiled Mon 02-Nov-09 18:20 by prod_rel_team
> *Mar  1 00:00:11.374: %SNMP-5-COLDSTART: SNMP agent on host
> AP70ca.9bd9.d590 is undergoing a cold start
> *Dec  6 19:19:46.045: Warning: Failed to run startup script
> *Dec  6 19:19:46.072: %MESH-6-BVI_CREATED: Mesh BVI1 interface created
> *Dec  6 19:19:46.093: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
> *Dec  6 19:19:46.105: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
> to reset
> *Dec  6 19:19:46.105: %LINK-5-CHANGED: Interface Dot11Radio0, changed state
> to reset
> *Dec  6 19:19:46.321: %SSH-5-ENABLED: SSH 2.0 has been enabled
> *Dec  6 19:19:46.655: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline
> power source
> *Dec  6 19:19:46.925: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0, changed state to down
> *Dec  6 19:19:47.097: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
> to up
> *Dec  6 19:19:47.109: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Dot11Radio1, changed state to up
> *Dec  6 19:19:47.109: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Dot11Radio0, changed state to down
> *Dec  6 19:19:47.531: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state
> to up
> *Dec  6 19:19:48.077: %LINK-3-UPDOWN: Interface BVI1, changed state to down
> *Dec  6 19:19:48.537: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Dot11Radio0, changed state to up
> flash:/mesh_start_cfg.txt: No such file or directoryThe filesystem
> containing the variables may not be initialized yet.
> *Dec  6 19:20:01.069: No Mesh startup file found
> *Dec  6 19:20:04.812: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh
> adjacency state machine started
> *Dec  6 19:20:04.813: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
> to reset
> *Dec  6 19:20:04.840: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
> to up
> *Dec  6 19:20:04.841: %LINK-5-CHANGED: Interface Dot11Radio0, changed state
> to reset
> *Dec  6 19:20:04.870: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state
> to up
> *Dec  6 19:20:04.870: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
> to reset
> *Dec  6 19:20:04.898: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
> to up
> *Dec  6 19:20:05.163: Logging LWAPP message to 255.255.255.255.
> *Dec  6 19:20:05.206: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host
> 255.255.255.255 started - CLI initiated
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>