[c-nsp] MPLS Forwarding table (Two commands difference)

[Xu Hu]

Thanks Oil, very detail professional explanation, easy to understand.

2012/7/16 Oliver Boehmer (oboehmer) <oboehmer at cisco.com>

>
> > Or the show mpls forwarding = show mpls ldp forwarding + show ip route
>
> No, the routing information is already used to establish "show mpls ldp
> forwarding", so it's more
>
> show mpls ldp forwarding = show mpls ldp binding + show route
>
> while
>
> show mpls forwarding = show mpls ldp forwarding + show bgp .. labels +
> show l2vpn ... + show mpls traffic-eng + ...
>
> to use your anology..
>
>         oli
>
>
>