[c-nsp] me3600x 6vpe

[Aaron]

Thanks a bunch, good info.   I'll keep looking for 15.2(4)S

Aaron

-----Original Message-----
From: Pshem Kowalczyk [mailto:pshem.k at gmail.com] 
Sent: Tuesday, July 17, 2012 4:40 PM
To: Aaron
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] me3600x 6vpe

Hi,

On 18 July 2012 09:20, Aaron <aaron1 at gvtc.com> wrote:
> Do y'all know if me3600x can do 6vpe ?  if so how ?  (I mean basic 
> configs to get going using directly connect pe---ce ip advertisements 
> of ipv6 prefixes, oh and bare in mind that I already have functional 
> vpvn4 mpls l3vpn's running..so I just wanna add on v6 capability 
> (which I understand defines 6vpe))

According to my friendly SE - 6VPE is committed for 15.2.(4)S (likely Q3FY12).

> Also, if I use a redundant rr ibgp architecture for my pe's 
> neighboring for L3VPN's..is there any ipv6 specific configs that will 
> need to be put on the redundant rr's in order for 6vpe to work?  I 
> read that the sp core remains
> ipv4 only even though you enable 6vpe on the edge..so I'm wondering if 
> I don't have to do anything on the rr's.  lemme know

You'll have to enable vpnv6 family on the sessions with your 6VPEs.
Effectively a copy of your vpnv4 family settings; and except for the family name there is no trace of IPv6 in the config of the RR.

kind regards
Pshem