[c-nsp] me3600x 6vpe

Pshem Kowalczyk pshem.k at gmail.com
Tue Jul 17 17:39:55 EDT 2012


Hi,

On 18 July 2012 09:20, Aaron <aaron1 at gvtc.com> wrote:
> Do y'all know if me3600x can do 6vpe ?  if so how ?  (I mean basic configs
> to get going using directly connect pe---ce ip advertisements of ipv6
> prefixes, oh and bare in mind that I already have functional vpvn4 mpls
> l3vpn's running..so I just wanna add on v6 capability (which I understand
> defines 6vpe))

According to my friendly SE - 6VPE is committed for 15.2.(4)S (likely Q3FY12).

> Also, if I use a redundant rr ibgp architecture for my pe's neighboring for
> L3VPN's..is there any ipv6 specific configs that will need to be put on the
> redundant rr's in order for 6vpe to work?  I read that the sp core remains
> ipv4 only even though you enable 6vpe on the edge..so I'm wondering if I
> don't have to do anything on the rr's.  lemme know

You'll have to enable vpnv6 family on the sessions with your 6VPEs.
Effectively a copy of your vpnv4 family settings; and except for the
family name there is no trace of IPv6 in the config of the RR.

kind regards
Pshem


More information about the cisco-nsp mailing list