[c-nsp] acl on bvi in ios xr (9k) 4.1.2

[chip]

interface BVI101
 description cust-bgp-1 vlan 101
 ipv4 address x.x.x.x 255.255.255.252
 ipv4 access-group cust-bgp-1-out-acl egress

This is gained support in 4.2.0 I think.

--chip

On Thu, Jul 19, 2012 at 12:39 PM, Aaron <aaron1 at gvtc.com> wrote:
> Are acl's supported on BVI's ?
>
> I have a phy int g0/0/0/1 with a flow point (sub int) g0/0/0/1.10
> l2transport config'd and put into l2vpn bg:bd with a routed int inside that
> bg:bd as bvi 10
>
>
>
> I would think that the appropriate location to place an ipv4 access-list
> would be on the L3 interface , that being the bvi.  But I don't see the
> command "ipv4 access-list" under the bvi.
>
>
>
> What am I missing here ?
>
>
>
> Aaron
>
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



-- 
Just my $.02, your mileage may vary,  batteries not included, etc....