[c-nsp] Apply C-VID and S-VID to untagged packet

[Ian Couch]

Does anyone know of a way to do this without using 2 switches?  I've used
selective q-in-q to apply an outer 802.1Q tag to a given C-VID, as well as
a number of other options on a selective q-in-q port, but can't seem to
handle untagged packets the way I want to do it, i.e. applying an inner and
outer tag to the packet.  Using the native vlan doesn't work, or at least I
haven't managed to get it working that way.

Thank you,

-- 

*Ian Couch* | Network Engineering IP Specialist

*Tbaytel *| 871 Tungsten St. | Thunder Bay, Ontario | P7B 6H2

Tel. (807) 625-2018 | Cell. (807) 624-6355 | Fax. (807) 623-2237

Email: ian.couch at tbaytel.com

www.tbaytel.net



This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this email. Please notify the sender immediately by e-mail if you have received this email by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.