[c-nsp] BVIs and finding MAC addresses in IOS XR

[Klaus Kastens]

Hi John,

> I've run into a problem that I can't figure out. We have a BVI
> configured with several ports in the bridge domain.If I know the MAC
> address of a device, how do I find which layer two port it is
> connected to? In IOS I would simply do 'show mac-address-table" and
> look for it. I can find no similar command in XR. The output of "show

In IOS you could also try "show bridge H.H.H"

Is this related to VPLS?
There is "show l2vpn forwarding bridge-domain mac-address" in IOS XR.


Best regards,
 Klaus

-- 
Klaus Kastens                                               NetUSE AG
Dr.-Hell-Str. 6, D-24107 Kiel,                                Germany
Fon: +49 431 2390 400 (06:00 UTC - 16:00 UTC)
Fax: +49 431 2390 499











Vorstand: Dr. Joerg Posewang (Vorsitz), Dr. Roland Kaltefleiter, Andreas Seeger
Aufsichtsrat: Dr. Dirk Lukas (Vorsitz)
Sitz der AG: Kiel, HRB 5358 USt.ID: DE156073942

Diese E-Mail enthaelt vertrauliche oder rechtlich geschuetzte Informationen.
Das unbefugte Kopieren dieser E-Mail oder die unbefugte Weitergabe der
enthaltenen Informationen ist nicht gestattet.

The information contained in this message is confidential or protected by
law. Any unauthorised copying of this message or unauthorised distribution
of the information contained herein is prohibited.