[c-nsp] OSPFv3 support for IOS and IOS-XR

[adam vitkovsky]

OSPFv3 VRF-Lite/PE-CE

 

adam

 

From: Xu Hu [mailto:jstuxuhu0816 at gmail.com] 
Sent: Friday, June 22, 2012 11:52 AM
To: adam vitkovsky
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] OSPFv3 support for IOS and IOS-XR

 

which one means you can disable the pe specific check for down-bit?

2012/6/22 adam vitkovsky <adam.vitkovsky at swan.sk>

It's basically saying you can disable the PE specific check for down-bit
In other words it supports the cmd: capability vrf-lite
It's the same cmd in IOs and IOS-XR

adam

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Xu Hu
Sent: Friday, June 22, 2012 6:10 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] OSPFv3 support for IOS and IOS-XR

Hi Folks,

Recently we are checking the OSPFv3 VRF support for IOS and IOS-XR.
Through the Cisco Feature Navigator, i found two related, one is MPLS VPN
OSPFv3 PE-CE, another one is OSPFv3 VRF-Lite/PE-CE, i don't know whether
this two are the same or not.
My understanding is that OSPFv3 VRF-Lite/PE-CE is for IOS, i.e, for the
7600.
Then the MPLS VPN OSPFv3 PE-CE is for IOS-XR, i.e, for the GSR, CRS,
ASR9000.

Will appreciate for any comments.

Thanks & Best Regards,
Hu Xu

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/