[c-nsp] OSPFv3 support for IOS and IOS-XR

[Xu Hu]

For this OSPFv3 VRF-Lite/PE-CE, is support the ospfv3 between PE and CE
under vrf.
Don't quiet understand what you mean.

2012/6/22 adam vitkovsky <adam.vitkovsky at swan.sk>

> OSPFv3 VRF-Lite/PE-CE****
>
> ** **
>
> adam****
>
> ** **
>
> *From:* Xu Hu [mailto:jstuxuhu0816 at gmail.com]
> *Sent:* Friday, June 22, 2012 11:52 AM
> *To:* adam vitkovsky
> *Cc:* cisco-nsp at puck.nether.net
> *Subject:* Re: [c-nsp] OSPFv3 support for IOS and IOS-XR****
>
> ** **
>
> which one means you can disable the pe specific check for down-bit?****
>
> 2012/6/22 adam vitkovsky <adam.vitkovsky at swan.sk>****
>
> It's basically saying you can disable the PE specific check for down-bit
> In other words it supports the cmd: capability vrf-lite
> It's the same cmd in IOs and IOS-XR
>
> adam****
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Xu Hu
> Sent: Friday, June 22, 2012 6:10 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] OSPFv3 support for IOS and IOS-XR
>
> Hi Folks,
>
> Recently we are checking the OSPFv3 VRF support for IOS and IOS-XR.
> Through the Cisco Feature Navigator, i found two related, one is MPLS VPN
> OSPFv3 PE-CE, another one is OSPFv3 VRF-Lite/PE-CE, i don't know whether
> this two are the same or not.
> My understanding is that OSPFv3 VRF-Lite/PE-CE is for IOS, i.e, for the
> 7600.
> Then the MPLS VPN OSPFv3 PE-CE is for IOS-XR, i.e, for the GSR, CRS,
> ASR9000.
>
> Will appreciate for any comments.
>
> Thanks & Best Regards,
> Hu Xu****
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/****
>
> ** **
>