[c-nsp] WS-X6704-10GE, WS-X6708-10GE

[Artyom Viklenko]

On 02.03.2012 13:03, Dmitry Valdov wrote:
>
>
>
> I had a simular problem a few months ago.
> I saw overruns and loss of packets when much traffic flowed from one
> port of 6704 to another port of the same card. (Actually it was port
> mirroring).
>
> The problem was fixed by configuring "fabric buffer-reserve low" (or
> medium).

Hm.. this increase space for incoming packets? Correct?
Interesting. Do I need to reload router after this command applied?

>
>
> On Fri, 2 Mar 2012, Artyom Viklenko wrote:
>
>> On 02.03.2012 12:03, Alan Buxey wrote:
>>> without DFC cards, some work/decisions still have to go to the
>>> supervisor. DFC (distributed) is what gives your modules autonomy
>>>
>>> alan
>>>
>>
>> This is already clear. :) The only not-so-clear thing now is the
>> internals of these line cards.
>>
>> Thank you!
>


-- 
            Sincerely yours,
                             Artyom Viklenko.
-------------------------------------------------------
artem at aws-net.org.ua | http://www.aws-net.org.ua/~artem
artem at viklenko.net   | JID: artem at jabber.aws-net.org.ua
FreeBSD: The Power to Serve   -  http://www.freebsd.org