[c-nsp] sup720/6704 error PM_SCP-SP-2-LCP_FW_ERR_INFORM

[Paul]

Seeing this error on a 6506 with sup720-3bxl
Module was originally in slot 1, which showed this error consistently, 
moved to slot 4 and it did not show error until hours later.
Passes all diagnostics thrown at it.  Tried different xenpaks, googled 
the error but could not find the exact one.
Module 3 works fine.  I'm wondering if it's the actual 6704 module. Both 
have DFC 3BXL.
Going to get a replacement for it, but was curious if anyone else has 
seen this error because I could not find it with
internet search.
Port 2 on module 4 works, even worked in slot 1.  Just seems port 4 is bad?

Cisco IOS Software, s72033_rp Software 
(s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI6, RELEASE 
SOFTWARE (fc4)
   3    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL
   4    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAD
   5   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAL
   6    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL     SAD

Log:
Mar 10 11:57:17 UTC: %LINK-SP-3-UPDOWN: Interface TenGigabitEthernet4/4, 
changed state to down
Mar 10 11:57:20 UTC: %LINK-3-UPDOWN: Interface TenGigabitEthernet4/4, 
changed state to up
Mar 10 11:57:20 UTC: %LINK-SP-3-UPDOWN: Interface TenGigabitEthernet4/4, 
changed state to up
Mar 10 11:57:22 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
TenGigabitEthernet4/4, changed state to up
Mar 10 11:57:21 UTC: %LINEPROTO-SP-5-UPDOWN: Line protocol on Interface 
TenGigabitEthernet4/4, changed state to up
Mar 10 11:57:33 UTC: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 4 is 
experiencing the following error: RO[3]: 125056 noncritical interrupts 
last 10s, now disabled.
ROINTMSK[3]:
2E9:0xC
00F:0x728
024:0x1FF9
0E8:0x4
052:0x0
04C:0x1E
049:0x0
09D:0x2FF9
009:0x0
00C:0x0

Mar 10 12:11:13 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
TenGigabitEthernet4/4, changed state to down
Mar 10 12:11:13 UTC: %LINK-3-UPDOWN: Interface TenGigabitEthernet4/4, 
changed state to down
Mar 10 12:11:13 UTC: %LINEPROTO-SP-5-UPDOWN: Line protocol on Interface 
TenGigabitEthernet4/4, changed state to down
Mar 10 12:11:13 UTC: %LINK-SP-3-UPDOWN: Interface TenGigabitEthernet4/4, 
changed state to down
Mar 10 12:11:32 UTC: %LINK-3-UPDOWN: Interface TenGigabitEthernet4/4, 
changed state to up
Mar 10 12:11:32 UTC: %LINK-SP-3-UPDOWN: Interface TenGigabitEthernet4/4, 
changed state to up
Mar 10 12:11:35 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
TenGigabitEthernet4/4, changed state to up
Mar 10 12:11:35 UTC: %LINEPROTO-SP-5-UPDOWN: Line protocol on Interface 
TenGigabitEthernet4/4, changed state to up

Thanks!

-- 
GloboTech Communications
Phone: 1-514-907-0050 x 215
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750
paul at gtcomm.net
http://www.gtcomm.net