[c-nsp] Configuring a cisco switch trunk port to allow dot1q and dot1ad frames

[Håvard Staub Nyhus]

> My need is I should be able to send traffic over cisco port for dot1q
> vlan 2501 and dot1ad vlan 2503:1 (outer tag 88a8). Pl suggest me.
>

Do you have ES-cards in this 7600? You need something that can do
selective QinQ to accomplish this.

Otherwise you could just do the filtering on the connected device?

-- 
Håvard Staub Nyhus
Atea AS