[c-nsp] Nexus network Design - Switching LOOP

[Alessandro Braga]

On Nexus devices, Ensure that you are configuring the ports correctly for the type of device to which the interface is connected.

Att,
Alessandro Braga
CCIE #30393


On Mar 13, 2012, at 8:56, jack daniels <jckdaniels12 at gmail.com> wrote:

> Hi Guys,
> 
> I have a scenario for which I'm scratching my head since long - please help
> 
> 
> Nexus 5K-1---------Nexus5K-2
> |                                 |
> |                                 |
> Nexus2K-1          Nexus2K-2
> |                                     |  Port eth 1/1
> |                                     |
> Cisco 3750-----------------------
> 
> 
> In this scenario Switching LOOP is getting formed. Only way I'm able
> to get rid is shutdown Port eth1/1 on Nexus2K-2. Please help in this
> case.
> 
> Thanks in anticipation in adavance.
> 
> Regards
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/