[c-nsp] Nexus network Design - Switching LOOP

[jack daniels]

Hi Alessandro,

Please suggest the configuration , if that can help avoid loop.

Regards

On Tue, Mar 13, 2012 at 5:58 PM, Alessandro Braga <sandro.unix at gmail.com> wrote:
> On Nexus devices, Ensure that you are configuring the ports correctly for the type of device to which the interface is connected.
>
> Att,
> Alessandro Braga
> CCIE #30393
>
>
> On Mar 13, 2012, at 8:56, jack daniels <jckdaniels12 at gmail.com> wrote:
>
>> Hi Guys,
>>
>> I have a scenario for which I'm scratching my head since long - please help
>>
>>
>> Nexus 5K-1---------Nexus5K-2
>> |                                 |
>> |                                 |
>> Nexus2K-1          Nexus2K-2
>> |                                     |  Port eth 1/1
>> |                                     |
>> Cisco 3750-----------------------
>>
>>
>> In this scenario Switching LOOP is getting formed. Only way I'm able
>> to get rid is shutdown Port eth1/1 on Nexus2K-2. Please help in this
>> case.
>>
>> Thanks in anticipation in adavance.
>>
>> Regards
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/