[c-nsp] VSS display of show run on standby switch

Jose Conceicao conceicao.jose at gmail.com
Wed Mar 14 10:56:05 EDT 2012


Hi Brad,

hkgi-ddcevssa#sho mod switch 2
 Switch Number:     2   Role:  Virtual Switch Standby
----------------------  -----------------------------
Mod Ports Card Type                              Model              Serial
No.
--- ----- -------------------------------------- ------------------
-----------
  1   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP
xxxxxxxxxx
  2   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP
xxxxxxxxxx
  3   16  CEF720 16 port 10GE                    WS-X6716-10GE
 xxxxxxxxxx
  4   16  CEF720 16 port 10GE                    WS-X6716-10GE
 xxxxxxxxxx
  5    5  Supervisor Engine 720 10GE (Hot)       VS-S720-10G
 xxxxxxxxxx
  6   16  CEF720 16 port 10GE                    WS-X6716-10GE
 xxxxxxxxxx
  7   16  CEF720 16 port 10GE                    WS-X6716-10GE
 xxxxxxxxxx
  8    8  CEF720 8 port 10GE with DFC            WS-X6708-10GE
 xxxxxxxxxx
  9    8  CEF720 8 port 10GE with DFC            WS-X6708-10GE
 xxxxxxxxxx

Regards,
Jose

On Wed, Mar 14, 2012 at 2:26 PM, Chuck Church <chuckchurch at gmail.com> wrote:

> Haven't touched VSS in 8 months, but I believe you can do a 'sh mod ?' and
> after mod, you can do options for the individual chassis numbers.
>
> Chuck
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Brad Clausen
> Sent: Wednesday, March 14, 2012 3:00 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] VSS display of show run on standby switch
>
> Hey Guys,
>
> I have 2 x 6509's running as a virtual switch (VSS). I can't for the likes
> of me work out the command to display the serial number details of the
> Supervisor that is in standby.  The Show run displays the details of the
> active supervisor.
>
>
> OMESW001#sho switch virtual
> Switch mode                  : Virtual Switch
> Virtual switch domain number : 100
> Local switch number          : 2
> Local switch operational role: Virtual Switch Active
> Peer switch number           : 1
> Peer switch operational role : Virtual Switch Standby OMESW001#
>
>
> how can I display the show run equivalent on peer switch 1?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list